prototype

　mold design

mold making

LDPE(Low Density Polyethylene) data sheet

--------------------------------------------------------------------------------
LEGEND
A = amorphous - Cr = crystalline - C = clear - E = excellent - G = good - P = poor
O = opaque - T = translucent- R = Rockwell - S = Shore
--------------------------------------------------------------------------------

STRUCTURE: Cr

SPECIFIC DENSITY: 0.92

WATER ABSORBTION RATE (%): 0.01

ELONGATION (%): 500

TENSILE STRENGTH (psi): 1700

COMPRESSION STRENGTH (psi): 1400

FLEXURAL STRENGTH (psi): 1400

FLEXURAL MODULUS (psi): 22000

IMPACT (IZOD ft. lbs/in): NB

HARDNESS: SD55

FABRICATION
- BONDING: P
- ULTRASONIC WELDING: P
- MACHINING: P

DEFLECTION TEMPERATURE (deg. F)
- @ 66 psi: 113
- @ 264 psi: 95

UTILZATION TEMPERATURE (deg. F)
- min: -76
- max: 210

MELTING POINT (deg. F): 248

COEFFICIENT OF EXPANSION: 0.00009

ARC RESISTANCE:

DIELECTRIC STRENGTH (kV/mm):

TRANSPARENCY: T

UV RESISTANCE: P

CHEMICAL RESISTANCE
- ACIDS: G
- ALKALIS: E
- SOLVENTS: E